← Zurück zum Help-Center
Setup 4 min read

Belabox Push to FizzyPeak via SRTLA Relay

How to connect your Belabox Cloud to FizzyPeak via SRTLA Push — the best solution for bonding without your own server.

Belabox Push to FizzyPeak via SRTLA Relay

If you use Belabox Cloud, pushing directly to FizzyPeak is the cleanest way to take advantage of your bonded SIM cards. No double relay, no unnecessary latency, full error correction. Here's how to set it up.

What is the push for?

Belabox Cloud receives the signal from your Belabox hardware and has to forward it somewhere. With SRTLA Push, you tell Belabox: "Send the stream directly to FizzyPeak" — instead of decoding and redistributing it itself first. The result: minimal latency, maximum quality.

Finding your credentials in FizzyPeak

  1. Open your FizzyPeak dashboard
  2. Go to Ingests → SRTLA
  3. Note down:

- Host (e.g. srtla.fizzypeak.stream) - Port (usually 5000) - Stream ID (your personal token)

Setting up the push in Belabox Cloud

  1. Log in to the Belabox Cloud Portal{target="_blank"}
  2. Select SRT(LA) Relays in the top menu
  3. Click Push
  4. Fill in the fields:

- Name: FizzyPeak - Host: your FizzyPeak SRTLA host - Port: your FizzyPeak SRTLA port - Stream ID: your FizzyPeak Stream ID - Latency: 4000 ms (default)

  1. Save

Activating the stream

As soon as you start your Belabox hardware and switch the relay on in Belabox Cloud, you'll see the incoming SRTLA stream in FizzyPeak under Stream Health.

Fine-tuning

Increase latency on poor connections — If you stream in rural areas with fluctuating mobile coverage, set the latency to 6000–8000 ms. This gives the bonding more buffer.

Fixed bitrate vs. dynamic bitrate — In the Belabox UI you can enable DBR. This adjusts the bitrate to your current network quality. Strongly recommended for IRL.

Connection prioritization — If you've bonded several SIMs + Wi-Fi, you can set priorities in Belabox. Your cheapest or fastest network gets the largest traffic budget.

FizzyPeak extras

Once the SRTLA stream reaches us:

  • Cloud-OBS can use the feed directly as a scene
  • Auto-Clip detects highlights in real time and saves them
  • Multistream pushes to Twitch, YouTube and TikTok simultaneously
  • AI moderator scans chat and audio for TOS violations

When the push doesn't arrive

Status stays "Connecting" in Belabox — usually a typo in the host or port. Copy the data cleanly from FizzyPeak again.

"Authentication failed" — your Stream ID is wrong or expired. Click Regenerate Stream ID in the FizzyPeak dashboard and enter the new one.

Stream connects, but no picture in FizzyPeak — check whether your Belabox hardware actually has input (HDMI or RTMP). The push can run empty.

Noch Fragen? Öffne das Dashboard oder schreib im Discord #support.