Lost Mobile Signal Mid-Stream — What Now?
You lose signal on the move and the stream drops? With FizzyPeak's NOALBS-style logic almost nothing happens — as long as you know what to do.
Lost Mobile Signal Mid-Stream — What Now?
You're in the middle of a stream and suddenly the signal drops. Tunnel, elevator, dead zone — it happens to every IRL streamer. The good news: with FizzyPeak your broadcast stays live on Twitch and YouTube even when your phone is offline for a few seconds. Here we explain what happens behind the scenes and how to handle it.
What FizzyPeak does automatically
We've built logic similar to NOALBS (Nothing Other Auto Live-Broadcast-Solution) right into the Cloud-OBS:
- The ingest detects signal loss within 1–2 seconds
- Automatically switches to a standby scene — you keep seeing "Connection lost, be right back" instead of a freeze
- The stream stays active on Twitch/YouTube — you don't lose any viewers
- As soon as your encoder is back online, it automatically re-joins the ingest
- Returns to the main scene once the bitrate stabilizes
All of this runs without any action from you.
What you can do yourself
1. Stay calm
The most common source of error: panic. Streamers start restarting the encoder, toggling WiFi on and off, toggling hotspots. That only makes everything worse.
Better: wait 30 seconds to see if the network reconnects on its own.
2. Change location
If you still have no signal after 30 seconds:
- Take a few steps toward a window/the street
- Drive out of the tunnel/elevator
- Hold it higher up (your body blocks the signal less)
3. Use multi-SIM
If your Belabox or Moblin bonds several SIMs, one active SIM is enough to keep the stream going. That's the main reason we recommend multi-SIM setups.
4. WiFi as a fallback
If you're near known WiFi networks (e.g. your own hotspot or McDonald's WiFi), your encoder connects automatically. Switch back off as you move on.
What you should NOT do
Stop the stream manually — Twitch closes the channel and your viewers are gone. Let FizzyPeak manage the disconnect.
Hard-restart the encoder — new session, Twitch has to accept the stream again, the latency buffer is gone, quality drops.
Keep typing !f — if the ingest is receiving nothing, no refresh helps. It only prolongs the recovery time.
How long does the buffer last?
FizzyPeak keeps your stream active on the destinations (Twitch, YouTube) for up to 60 seconds even when your encoder is offline. After that Twitch itself sets the broadcast to "Disconnected".
In practice: most signal losses are under 15 seconds. Under 60 seconds means no impact on the livestream.
Dashboard indicators
During a signal loss, the FizzyPeak Dashboard shows:
- Stream Health → red: "Ingest offline"
- Destinations → green: "Still broadcasting"
- Timer: how long the ingest has been offline
That's the critical value. From 45 seconds on, you should start planning whether you need to move somewhere else.
After recovery
As soon as your encoder is sending again:
- Ingest goes green (first 2 seconds buffer)
- Automatic scene switch back to your main scene
- The chat bot posts: "@<you> is back online"
Quickly check that audio and video are in sync, otherwise send !refresh audio.
Prevention: before the stream
- Plan your route — avoid tunnels and dead zones
- Multi-carrier bonding — 2 different networks (Telekom + Vodafone, O2 + eplus)
- Backup WiFi hotspot in your backpack (second phone with a data plan)
- Make a nice standby scene — a professional "be right back" scene makes outages less painful
Noch Fragen? Öffne das Dashboard oder schreib im Discord #support.