Connect the Moblin iOS App to FizzyPeak

Use Moblin on iOS as a mobile IRL encoder — QR scan or manual config.

Moblin iOS Setup

Moblin is an open-source iOS app that turns your iPhone into a full-fledged SRT(-LA) encoder. Perfect when you're out and about without Belabox hardware — the iPhone counts as a single uplink, and with extra relay servers it can act as a mini-bond.

Installation

1. App Store: download "Moblin — IRL Streaming"
2. On first launch: allow camera, microphone and location permissions

Stream configuration — QR code method (fastest way)

1. Open the FizzyPeak Dashboard on desktop/tablet
2. Account -> Setup Guide -> Ingest URL -> tab "Moblin"
3. A QR code is shown — it already contains your stream key
4. In Moblin: + -> "Import from QR Code" -> scan the code
5. The stream is created and activated automatically

Manual configuration

If you want to enter the URL by hand:

1. In Moblin Settings -> Streams -> + (new)
2. Name: FizzyPeak
3. URL:

srt://ingest.fizzypeak.stream:9999?streamid=publish:DEIN-KEY&latency=2000

1. Video: H.264, 1920x1080, 30fps, 4500 kbps
2. Audio: AAC, 128 kbps, 48 kHz stereo
3. Save -> tap the configured stream above the stream list -> "Select"

Go live

1. Tap "Start" in the top right
2. The iPhone counts down, then the stream is live
3. In the FizzyPeak Dashboard you'll see the ingest under Go Live within a few seconds

Recommended settings

Tips

• Enable Adaptive Bitrate in Moblin settings — it scales down automatically when the network collapses
• Set the audio compressor to "Soft" — prevents clipping in loud surroundings
• Turn on Stabilization in the camera tab — an iPhone gimbal in software

Battery warning: Moblin draws 20-30%/h. A power bank is mandatory for longer streams. Be sure to turn off iOS "Low Power Mode" — it throttles the encoder.

Moblin + external camera

Moblin supports GoPro and RTMP ingest as a source. Under Settings -> Cameras -> + -> RTMP Server you get a local RTMP URL that your GoPro (or any other RTMP source on the same WiFi) can push to.

Troubleshooting

• "SRT connection failed" -> check the stream ID format (publish:KEY, not just KEY)
• No audio -> re-grant the iOS microphone permission in Settings -> Moblin
• Stream cuts out every 30s -> Moblin is in the background, enable "Background Mode" in Moblin settings
• More help: Connection problems

Noch Fragen? Öffne das Dashboard oder schreib im Discord #support.